It is necessary to have the tag to fit the mould while the production of In-Moulding applications is in process. Due to the high performance of the 5 PIN IML titanium needles, the tag gets glued to the mould without problems. The static electricity being loaded on the tag due to the 5 PIN IML titanium needles provides perfect loading on the tag surface and especially on the head without causing any distortion or trail.
Technical Specifications
Operating Voltage: 30 kV
Material: Brass housing titanium needles
Application
In mould labelling Application Sheet
During in-mold labelling applications, the label can be attracted or repelled from the surface of the mould dependant on what charge is on either surface. The robot arm will pick the label and position the label.
If the label is the same polarity as the surface of the mould, the label will be repelled from the mould and rejected. If the label is of the same polarity, the label can be attracted from the robot arm and misaligned.
By neutralising the mould prior to the label being applied you will have a neutral surface to position your label onto. Then using a PULSElectronic generator and charging head (fitted to the robot arm) you can use the static charge to stick the label into position.