Due to high technologically design used in Anti-static bar it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Anti-static bar do not need any calibration and can be cleaned and cared easily. It was designed to neutralize destructive static charges during manufacturing. Using Anti-static bar will supply machines to perform hygienic, safe and qualitative production. Anti-static bar can be designed in different lengths to satisfy the requirements of needs of application.
Antistatic bar separates the air molecules to positive and negative ions. Due to principle of work of antistatic bar the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire, dust attraction will be also prevented. Anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life.
Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. It can be installed in restricted places. According to application it can be produced in different length.
General Specification
Easy to install / High performance / Safety / Long life
Applications
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
Technical Specifications
Operating Voltage: 7.5 kV AC
Main Frequency: 50 / 60 Hz
High Voltage Supply: Puls Power Supply Model 1
Max. Output Current: Less Than 5mA
Length: Any size from 100mm to 4000mm
Construction: Aluminium and PVC
Emitters: Stainless 304
Max Operating Distance: 150 mm
Best Distance For High Speeds: 25 - 50 mm
Cable: 2.5 m HV Cable
Ambient Temperature: 0 - 60 ºC
Ambient Humidity: Max 70 % RH
Weight: 0.974 Kg/m
Dimensions: 25 x 37 mm profile, max length 4000mm
Isolation: Epoxi
Approval: CE
Application
Over Wrapper Packaging Machine Application Sheet
On an over wrapping machine, the film is charged as it un-winds from the reel. Ths charge will attract airborne contamination onto the material which results in rejects and loss of revenue. The static charge can also jam the machine as the charge becomes so high that it attracts to the machine rollers which act as an earth potential.
By fitting PULSElectronic ionising bars to the un-wind, you will remove the static charge and prevent dirt and other airborne contamination from attracting to the web. This will increase productivity and profits whilst reducing waste and down time.