High Tension Strength (IML Foam) used on the front face of static loading apparatuses is produced only by PULS ELECTRONIC and is applied in its own devices as well as presented to other users occupied with the same area. Given below porper utilization of the IML Foam supplies a long-time work without causing any problem.
General Areas of Use
- In IML (In-Mould Labeling) Robots,
- In-Mould process loaded manually
- Any kind of label loading process that can be loaded statically
Application
In mould labelling Application Sheet
During in-mold labelling applications, the label can be attracted or repelled from the surface of the mould dependant on what charge is on either surface. The robot arm will pick the label and position the label.
If the label is the same polarity as the surface of the mould, the label will be repelled from the mould and rejected. If the label is of the same polarity, the label can be attracted from the robot arm and misaligned.
By neutralising the mould prior to the label being applied you will have a neutral surface to position your label onto. Then using a PULSElectronic generator and charging head (fitted to the robot arm) you can use the static charge to stick the label into position.