High voltage distributors are designed to make easy connection in high voltage applications. The new devices are available as 1 in 1out, 1 in 2 out, 1 in 4 out, with and without resistor. It became possible to work with many electrostatic products at the same time and there is no risk to be exposed to high voltage current any more.
Connection
Installation of High Voltage Distributor is very easy. Fix the HV Connectors to output of the Static Generator. After that each port of Connector will be ready to be connected to output of Multi Power Distributor.
Variations of product
- 1 in 1 out without resistant
- 1 in 2 out without resistant
- 1 in 4 out without resistant
- 1 in 1 out with resistant 40 mohm.
- 1 in 2 out with resistant 40 mohm.
- 1 in 4 out with resistant 40 mohm.
- 1 in 1 out with resistant 80 mohm.
- 1 in 2 out with resistant 80 mohm.
- 1 in 2 out with resistant 80 mohm.
Technical Specifications
Operating Voltage: Max. 30 kV DC
Connection: Bolted with HV plug
Construction: Black fire retarder PVC, epoxi
Dimension:
1 in 1 out: 76 mm x 117 mm x 35 mm
1 in 2 out: 97.5 mm x 117 mm x 35 mm
1 in 4 out: 140 mm x 117 mm x 35 mm
Application
Bag Handling Charging Application
When reinforcing the handles on plastic bags, a further sleeve is added for strength. This sleeve can repel from it set position due to static charges on ether the bag or the sleeve itself. This causes misalignment, wastage, down time and rejects.
After the sleeve has been positioned, you can induce a charge into the material using a PULSElectronic charging system. This will hold the sleeve while the thermo weld is completed and prevent wastage thus increasing productivity.