Ionized Air gun is a hand-held ionizing air gun for neutralization static charge and removing dust contamination of industrial applications. Air gun separates air molecules into positive and negative ions by means of electric field, then generates and transports them. Due to high-technologically design it is possible to produce more efficient results for static electric troubles even in high=speed applications. It provides high performance and efficient ionization with fast discharging time.
Anti-static air gun separates the air molecules to positive and negative ions. Due to principle of work of anti-static air gun the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Anti-static air gun does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life.
Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical shock. Air passing trough anti-static air gun must be clean and dry. Due to being ergonomic and lightweight anti-static air gun supplies soft and effective work.
General Specification
Rapid decay times / Ergonomic design / Easy in use
Applications
Moulding / Optics / Automobile parts / Screen printing / Plastic sheets / Electronic assemblies / Pre-paint decontamination / Cleaning and neutralization 3-D / Lens cleaning / Furniture finishing / Package cleaning
Technical Specifications
Operating Voltage: 7.5 kV AC
Main Frequency: 50 / 60 Hz
High Voltage Supply: Puls Power Supply Model 1
Construction: Stainless 304 emitter pins, plastichandle
Max Air Pressure(clean and dry air): 100 Psi / bar
Cable: 2,5 m HV Cable
Operating Distance: 500 mm
Ambient Temperature: 0 - 60 ºC
Approval: CE
Application
Contamination on Plastic Parts Application Sheet
After moulding, many plastic parts have further manufacturing process to go through prior to packing and shipping. If parts are to be painted, the high levels of static which are generated in the moulding process attract dust, dirt and other airborne contamination on to them. If the parts are not cleaned, the high levels of inclusions create re-work or rejects.
By bathing the product in ionised air you will eliminate the static charge that is attracting the contamination onto it. The PULSElectronic Ionising Blower is specifically designed to cover a large area with ionised air. Resulting in fewer inclusions, fewer rejects and higher productivity.