Static control nozzles are designed to neutralize high static charge in those industrial applications where anti -static bar cannot be mounted. Due to its ergonomic and light structure, nozzle is simple, soft and efficient in its use.
Static control nozzles provide effective ionization when the air molecules are separated to positive and negative ions. Due to principle of work the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented.
Static control nozzles do not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Static control nozzles are connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. Air passing trough static control nozzles must be clean and dry. Static control nozzles due to being ergonomic and lightweight supply soft and effective work
General Specification
Easy to install / Rapid decay times / Small and compact / Low coast
Applications
Moulding / Optics / Automobile parts / Screen printing / Plastic sheets / Electronic assemblies / Pre-paint decontamination / Cleaning and neutralization 3-D / Lens cleaning / Furniture finishing / Package cleaning / Vertical from filling
Techical Specifications
Operating Voltage: 7.5 kV AC
Main Frequency: 50 / 60 Hz
High Voltage Supply: Puls Power Supply Model 1
Construction: Stainless 304 emitter pins, aluminium body
Max Air Pressure(clean and dry air): Max 6 bar
Cable: 2,5 m HV Cable
Operating Distance: 500 mm
Dimensions: 30 x 30 x 90mm (width x height x length)
Approval: CE
Application
Vertical Form filling Machine Application Sheet
Static charges are generated as the material is un-wound from the reel. These charges increase as the web passes over rollers and into the forming area. The static charge will create an electro magnetic field which attracts airborne contamination onto the web. This can be a catastrophic problem in food packaging sector.
By positioning two PULSElectronic ionising bars (one either side of the web) after the un-wind, you will remove the static charge and eliminate the possibility of contamination being attracted to the material.
Dependant on the length of run from the un-wind to the forming area and the product you are filling in the formed bags (Dusty or powdery products can be worst effected), you may need to position a further two ionisers (one either side of the web) to prevent the product sticking to the inside of the formed bag and cause rejects at the thermo welding process.